Banner

新闻详情

Home > News Center > Content

The characteristics of the repair welding machine of the inner circle repair welding machine

Edit:Xinxiang Blueprint Machinery Co., Ltd.UpDate:2018-11-13

The inner circle repair welding machine is only one of the repair welding machines. It can mainly repair the inner hole. It is specially designed for on-site construction. It has the characteristics of small size, light weight, and good welding quality. It is suitable for the use environment and space. The requirements are not high, and it is easy to carry. It is mainly used in the repair welding of large equipment, pin holes, bearing holes and other round holes of construction machinery. The following will briefly introduce the characteristics of the repair welding machine.

1. High accuracy of welding repair. Since the output current and time of the welding machine are precisely controlled, the current (2-200A) and time (1-500ms) can be adjusted arbitrarily, and the small current of 2A can also run stably, so even if it is 0.1mm, The welding wire of 0.2mm can also get perfect welding, reaching the welding repair accuracy of laser welding machine.

2. The impact of welding repair is small, the arc starting current and time of the welding machine are several times lower than that of general-purpose argon welding, which overcomes the impact on the workpiece during the welding repair process, even for the processed surface of the workpiece without machining allowance. Can be repaired.

3. The heat effect is small, due to the welding repair current, the time is precisely controlled, so the input energy can be accurately controlled to ensure that the input energy is only enough for the fusion between the welding wire and the workpiece, and there will be no excessive energy It acts on the workpiece, so that the surface of the workpiece is less affected by heat, and the repair effect is achieved.

4. High bonding degree, high bonding degree after welding, applicable to various processing methods, and there will be no phenomenon such as weak bonding and falling off after welding of other types of cold welding machines.

Repair welding machine refers to the ability to release welding energy in a small area in an instant, so that the supplementary material can be completely welded on the workpiece. The overall heating of the workpiece is very small, so it can avoid the defects of traditional welding such as deformation, cracks, and discoloration. It is especially suitable for welding. Repair fine workpieces and workpieces that cannot be welded at high temperature. There is still a lot of information about the inner circle repair welding machine and repair welding machine. If you are interested in this information, you can log on to our company's official website, or you can call the hotline for consultation learn.