Banner

新闻详情

Home > News Center > Content

Cause Analysis of Common Problems in the Process of Boring Machine

Edit:Xinxiang Blueprint Machinery Co., Ltd.UpDate:2020-04-03

  boring machineIt is a kind of equipment used for deep hole processing. It has a good application for machine tools and cylinder processing. When using the equipment, it often encounters some problems that cannot be solved. Next, let’s take a look at the introduction of the technical personnel of the manufacturer. :
First, the hydraulic boring machine has the problem of shutting down when it is working?
Some users reported that when they used the hydraulic boring machine, there was a problem of equipment shutdown, and the problem could not be solved by restarting the hydraulic station or replacing the hydraulic oil. Then in response to this problem, the manufacturer’s technicians told us: It may be that the equipment is internal The problem caused by the internal leakage of the hydraulic pressure, so it is necessary to check the seals of the electromagnetic ball valve, one-way valve and so on, and the problem cannot be solved simply by changing the oil.


2. The processing speed of the boring machine cannot be controlled?
Sometimes when using this equipment, the speed cannot be adjusted, which annoys many users. The manufacturer’s technicians told us: the larger the pulley on the motor, the faster the spindle speed of the boring machine; the smaller the pulley on the motor, the faster the spindle speed of the boring machine. slower.
The larger the passive pulley, the slower the spindle speed of the boring machine; the smaller the pulley of the driven pulley, the faster the spindle speed of the boring machine. So this problem can be solved by the above method.
To sum up, the above is the introduction of the technical staff of the boring machine manufacturer about the common use problems. If you have any other questions, please contact us.