Home > News Center > Content

Keep abreast of the precautions of the boring machine

Edit:Xinxiang Blueprint Machinery Co., Ltd.UpDate:2020-05-15

The boring machine is used for boring the cylinder bore and cylinder liner inner hole of internal combustion engines such as automobiles and tractors. It can also be used for boring processing equipment such as oil cylinders, cylinders, and hydraulic cylinders. There are some Notes need to be understood in time:

1. When using the boring machine, you need to pay attention to fixing the boring bar. Install the appropriate type of boring bar and supporting flange on the relevant parts that need to be processed by the boring machine, and then adjust the center of the boring bar After finishing, you can proceed to the following processing work. When installing a fixed boring bar, you must pay attention to finding the centering, and then maintain a firm and stable welding, so that you can maintain a uniform and stable rotation speed of the boring bar in subsequent operations. .
2. At the same time, when using the boring machine, you must pay attention to the appropriate length of the bracket, and do not use an overly long shaft, because this may cause a very adverse effect on the subsequent rod feeding device, and the indoor temperature will also be affected. It should be controlled at a reasonable level. This is more conducive to the normal operation of the boring machine. Don't forget to properly lubricate the boring machine after a period of use, which can ensure the normal operation of the boring machine for a long time.